Create It Yourself

Beautiful Shelf Borders

Give your simple shelving unit a makeover

Print Page

It’s easier than you think to turn your existing furniture into something new. We’ll show you, step by step, how you can breathe new life into a shelving unit with a beautiful scalloped border.

  1. Firstly, you’ll need to cut the MDF to the exact width and height of your shelving unit. Then draw a border line around the inside edge of the material. In this case the border is 20mm from the edge.

    001

  2. It’s now time to create the curved stencil pattern. To ensure the curves are of equal size, divide the overall height and width of the book case (within the border you’ve just created), by number of curves you want along each edge. Aim for curves approximately 20cm wide, and mark dots at equal distance around the inside of your border.

    002

  3. Now you’ll need a circular item (e.g. a plate) to mark out the curves. Place the circular item in between each of the dots, and draw around the circular edge to create the curved cutting stencil.

    003

  4. Once you’ve drawn the equally-sized curves around the edges of the border, you now have your cutting stencil.

    004

  5. Drill a hole into the MDF close to the cutting stencil line. This hole will help you to start the cut with your Jigsaw.

    005

  6. Carefully cut around the curved stencil.

    006

  7. You now have your decorative border.

    007

  8. Smooth any rough edges using sand paper.

    008

  9. Add a base layer of paint in the same colour as your existing shelving unit.

    009

  10. Align the decorative fascia with your shelving unit, and fix the fascia to the shelving using a hammer and pins.

    010

  11. Paint the entire shelving in the colour of your choice.

    011

  12. You’ve added some personality to your tired old shelving!

Beautiful Shelf Borders