Create It Yourself

Relax And Have A Seat

Enjoy your garden this summer with a homemade timber bench

Print Page
outdoor_bench

Simple in its construction and easily customised with paint, stain or decoration, this easy, homemade bench is the perfect way to style your garden. It holds its own as a standalone piece, or you can tailor it to match your existing outdoor decor.

  1. Bench3650

    After measuring and marking your wood, use your circular saw to cut the following pieces:

    - 4 legs from the 244cm 102x102mm, each 457cm long
    - 2 long framing pieces from the 25x102mm, each 122cm long
    - 2 frame ends and 2 frame centre struts from 25x102mm, each 116cm long

  2. Bench4a650

    Constructing a simple rectangle frame helps to distribute weight applied to the legs and seat of the bench and makes it easy to attach the post legs. .

    Bench4b650

    Line up two 116cm pieces flush with the ends of the 122cm pieces to create a long rectangle. Secure the pieces together with eight wood screws – four screws per end piece, one in each corner. Space the remaining 116cm pieces evenly in the centre of the frame and secure with four wood screws, two on each side.

  3. Bench5650

    Place the 122cm seating plank on the finished frame and ensuring all edges are flush, secure with wood screws around the edge of the frame and along the centre struts.

  4. Bench6650

    Place the post legs in each interior corner of the frame. Use your drill to secure the legs by driving four wood screws into each post through the frame’s exterior and seat of the bench.

  5. Bench7650

    Fill any screw borings with wood filler and sand the entire surface thoroughly with medium-grit sandpaper, then repeat with fine-grit sandpaper.
    Brush off sawdust with a cloth before applying your choice of wood stain or paint. After your finish has dried, protect your bench from the elements by applying a waterproofing sealer. Be sure to cover the bottom of each leg in this process – the feet get the most exposure to standing water, so waterproofing them is key. You could also add brass corners or brackets to your bench with screws for an elevated look.


Relax And Have A Seat