Start with the doors: place 2 wooden slats of 97.5cm parallel next to each other. Fill the lines up with 4 slats (33cm long) - this is the beginning of a door! With glue and nails, arrange and secure the whole as straight as possible.
1. Create 2 doors and attach the rattan to the frames with a nail gun. Attach the hinges to the doors with a drill driver. Draw the exact location of the doors on the closet. The doors need to fit perfectly, so take your time. Then attach the doors, with the other side of the hinges.
2. Continue on the side of the closet: with thumb tackers or nails attach the rattan onto the wood. Cut away any excess with a sharp knife or scissors. Then cut the roll on the exact right length, this way you don’t waste any of the rattan.
3. Let the rattan dry up before adding the ornamental slats. They need to be cut with mitre saw. Please take your time for this or otherwise the edges won’t fit perfectly. Attach the ornamental slats onto the rattan with Wood Glue. Let them dry for at least an hour, using clamps to secure.
4. Finally, you close up the back of the closet with a thin MDF-plate. Put this in place using nails. Your closet is finished!